The flake sodium hydroxide produced by the flake sodium hydroxide manufacturer is widely used.

Flaky sodium hydroxide, also known as edible flake caustic soda, white caustic soda, liquid caustic soda asbestos, alkalizing agent or strong alkali, its chemical name is sodium hydroxide(NaOH). It is a white solid that can be in the form of pellets, flakes or granules and is highly corrosive. Flaky sodium hydroxide in the air is easy to absorb moisture, soluble in water and strong heat, aqueous solution is strong alkaline, strong corrosive. In addition, it is also soluble in ethanol, glycerin, etc., but insoluble in ether.
 

The use of flake sodium hydroxide is very wide, including but not limited to the following aspects:

Industrial bleach: Used in industrial and consumer applications such as mold and mildew control, and pool and hot tub cleaning.

Petroleum products: Used in the exploration, production and processing of oil and natural gas to remove offensive odors such as hydrogen sulfide and mercaptans.

Aluminum production: used to dissolve bauxite as a raw material for aluminum production.

Chemical processing: Used as a basic raw material for a wide range of downstream products, including solvents, plastics, fabrics, adhesives, coatings, herbicides, dyes, inks, pharmaceuticals, etc.

Other small applications: including water treatment, beverage bottle cleaners, cleaning products (such as drain and pipe cleaners, oven cleaners) and other household cleaning products, home soaps, etc.

Flake sodium hydroxide is widely used in the national economy, and many industrial sectors need it. The sector that uses the most sodium hydroxide is the manufacture of chemicals, followed by paper, aluminum, tungsten, rayon, artificial cotton and soap manufacturing. In addition, it is also widely used in the production of dyes, plastics, pharmaceuticals and organic intermediates, the regeneration of old rubber, sodium, water electrolysis and inorganic salt production, the preparation of borax, chromium salt, manganate, phosphate and so on.

The production process of flake sodium hydroxide usually includes the steps of brine refining, electrolysis, evaporation and solid alkali firing. For more information, it is recommended to consult an expert in the field of chemistry. At the same time, due to its high degree of corrosion, safety measures should be paid attention to during use and storage.